\input texinfo @c -*-texinfo-*-
-@c %**start of header
+
@setfilename elpher.info
-@settitle Elpher Manual v1.0.0
-@c %**end of header
+@settitle Elpher Manual v3.1.0
+
+@dircategory Emacs
+@direntry
+* Elpher: (elpher). A gopher and gemini client for Emacs.
+@end direntry
@copying
-This manual documents Elpher, a gopher client for Emacs.
+This manual documents Elpher, a gopher and gemini client for Emacs.
-Copyright @copyright{} 2019 Tim Vaughan
+Copyright @copyright{} 2019, 2020, 2021 Tim Vaughan@*
+Copyright @copyright{} 2021 Daniel Semyonov@*
+Copyright @copyright{} 2021 Alex Schroeder
@quotation
The source and documentation of Elpher is free software. You can
@end copying
@titlepage
-@title Elpher Gopher Client Manual
+@title Elpher Gopher and Gemini Client Manual
@author Tim Vaughan
@page
@top Elpher
@insertcopying
-@end ifnottex
@menu
* Introduction:: Elpher Overview: what's this all about?
* Quick Start:: Get up and running quickly
* Navigation:: Fundamentals of Elpher navigation
* Bookmarks:: How to record and visit bookmarks
-* Character encodings:: How Elpher handles different character encodings
-* Encrypted connections:: How and when TLS is enabled
+* Gopher character encodings:: How Elpher selects encodings for gopher pages
+* Encrypted gopher connections:: How and when TLS is enabled for gopher
+* Gemini support:: Support for the Gemini protocol
+* Finger support:: Support for the Finger protocol
* Customization:: How to customize various aspects of Elpher
-* Index::
+* Command Index::
+* News:: Changes introduced by major releases
+* Acknowledgements:: Contributors to Elpher
+
+@detailmenu
+ --- The Detailed Node Listing ---
+
+Navigation
+
+* Within-page navigation:: Moving about within a page
+* Between-page navigation:: Commands for moving between pages
+* History and Caching:: Explanation of how Elpher represents history
+
+@end detailmenu
@end menu
+@end ifnottex
+
+@macro keycmd{key,cmd}
+@item \key\ (@code{\cmd\})
+@findex \cmd\
+@end macro
+
@node Introduction, Installation, Top, Top
@chapter Introduction
-Elpher aims to be a capable and practical gopher client for Emacs. Its
-focus is on easy keyboard-driven navigation based on sensible default
-bindings (with out-of-the-box support for Evil). It is intended to be
-robust and behave in non-surprising ways at all times. Additionally,
-Elpher provides the following bells and whistles:
+Elpher aims to be a capable and practical gopher and gemini client for
+Emacs. Its focus is on easy keyboard-driven navigation based on
+sensible default bindings (with out-of-the-box support for Evil). It is
+intended to be robust and behave in non-surprising ways at all times.
+Additionally, Elpher provides the following bells and whistles:
@itemize
+@item
+followable web and gopher links in plain text,
+
@item
an easily navigable history, sporting caching of visited pages (both
content and cursor position),
auto-completing menu item navigation,
@item
-followable web and gopher links in plain text,
+direct visualization of image files where supported (no writing to
+disk),
@item
-direct visualization of image files where supported (no writing to
-disk), and
+basic support for the new ``heavier than gopher, lighter than the web'' Gemini protocol,
@item
-a simple bookmark management system.
+support for the Finger protocol.
+
@end itemize
Elpher is still under active development. Although we try very hard to
ensure that releases are bug-free, this cannot be guaranteed. However,
this also means that any usability features that you feel are missing
-can likely by incoroporated quickly, so please get in touch if you
+can likely by incorporated quickly, so please get in touch if you
have some ideas.
@node Installation, Quick Start, Introduction, Top
@kbd{M-x package-delete @key{RET} elpher @key{RET}}.
@end example
-While not recommended, it is also possible to install Elpher directly by
-downloading the file @file{elpher.el} from
-@url{https://github.com/tgvaughan/elpher}, adding it to a directory in
-your @code{load-path}, and then adding
+It is also possible to install Elpher directly by downloading the file
+@file{elpher.el} from @url{gopher://thelambdalab.xyz/1/projects/elpher}
+(you'll need to download the ``source archive'' and extract it), adding
+it to a directory in your @code{load-path}, and then adding
@example
(require 'elpher)
To return to the page you just followed the link from, press @key{u}.
Elpher caches (for the duration of an Emacs session) both page contents
-and the position of point on each of the pages (gopher menus, query
-results, or text pages) you visit, restoring these when you next visit
-the same page. Thus, pressing @key{u} displays the previous page in
-exactly the same state as when you left, meaning that you can quickly
-and visually explore the different documents in a menu without having to
-wait for anything to reload.
+and the position of point on each of the pages (gopher menus, gemini
+pages, query results, or text pages) you visit, restoring these when you
+next visit the same page. Thus, pressing @key{u} displays the previous
+page in exactly the same state as when you left, meaning that you can
+quickly and visually explore the different documents in a menu without
+having to wait for anything to reload.
Of course, sometimes you'll @emph{want} to reload the current page
rather than stick with the cached version. To do this use @key{R}.
(This is particularly useful for search query results, where this
allows you to perform a different search.)
-That's more-or-less it. Elpher supports a number of other features, such
-as bookmarking, support for different coding schemes and TLS encryption,
-and a variety of customization options, all of which are explained in
-the rest of this document. However the emphasis is on keeping the basic
+That's more-or-less it. Elpher supports a number of other features,
+such a support for different coding schemes and TLS encryption, and a
+variety of customization options, all of which are explained in the
+rest of this document. However the emphasis is on keeping the basic
navigation experience as intuitive and responsive as possible.
+Note that you can launch multiple Elpher sessions in parallel by using
+a prefix:
+
+@example
+@kbd{C-u M-x elpher @key{RET}}
+@end example
+
@node Navigation, Bookmarks, Quick Start, Top
@chapter Navigation
-by
Throughout this manual, we use the word ``page'' to refer to any
-visualization of a response from a gopher server, be it a
-menu/directory, query result, text file or image. We use
+visualization of a response from a gopher or gemini server, be it a
+menu/directory, query result, text file or image.
Elpher's navigation interface is inspired by the Emacs Info mode.
Movement within a page is essentially the same as moving
links and menu items.
@table @asis
-@item @key{TAB} (@code{elpher-next-link})
+@keycmd{@key{TAB}, elpher-next-link}
Move to the next link or menu item in the file.
-@item @kbd{Shift-@key{TAB}}/@key{backtab} (@code{elpher-prev-link})
+@item @kbd{Shift-@key{TAB}} or @key{BACKTAB} (@code{elpher-prev-link})
+@findex elpher-prev-link
Move to the previous link or menu item in the file.
-@item @kbd{m} (@code{elpher-jump})
+@keycmd{@key{m}, elpher-jump}
Jump directly to a link within a file by specifying its display string
or link text. (Unlike the previous two commands, this immediately opens
the selected link.
@end table
+
The following commands can be used to retrieve information about the
current page, or the address of the link at point:
@table @asis
-@item @kbd{i} (@code{elpher-info-link})
+@keycmd{@key{i}, elpher-info-link}
Display host, port and selector information for the link at point.
-@item @kbd{I} (@code{elpher-info-current})
+@keycmd{@key{I}, elpher-info-current}
Display host, port and selector information for the current page.
-@item @kbd{c} (@code{elpher-copy-link-url})
+@keycmd{@key{c}, elpher-copy-link-url}
Add URL representing address of link at point to the kill-ring and the
system clipboard (if available).
-@item @kbd{C} (@code{elpher-copy-current-url})
+@keycmd{@key{C}, elpher-copy-current-url}
Add URL representing address of the current page to the kill-ring and
the system clipboard (if available).
-@item @kbd{d} (@code{elpher-download})
+@keycmd{@key{d}, elpher-download}
Download link at point and save the result as a file. The minibuffer
will prompt for the name of the file to write, with the default name being
the display string (if available) associated with the link.
-@item @kbd{D} (@code{elpher-download-current})
-This is similar to @code{elpher-downlowd}, but instead applies to the
+@keycmd{@key{D}, elpher-download-current}
+This is similar to @code{elpher-download}, but instead applies to the
current page rather than a link.
-@item @kbd{w} (@code{elpher-view-raw})
+@keycmd{@key{.}, elpher-view-raw}
This displays the raw server response for the current page. While not
useful for general browsing, it is useful for debugging incorrect rendering
or out-of-spec server responses.
described by the following command:
@table @asis
-@item @kbd{RET}, @kbd{mouse-1} (@code{elpher-follow-link})
+@keycmd{@key{RET}\, @key{mouse-1}, elpher-follow-link}
Follow the menu item or link at point (or selected with the mouse).
Exactly what is meant by ``follow'' depends on the kind of item selected:
@itemize
@item
-For text or menu type items or links, the curent page text is replaced
+For text or menu type items or links, the current page text is replaced
by the text of this item. Unless the customization variable
@code{elpher-use-header} (@pxref{Customization}) is
@code{nil}, the display string of the link is displayed in the buffer header.
@item
Following links of type `h' with a selector having the `URL:' prefix, or
-non-gopher URLs in text files, will result in Elpher using an external
+unsuported URLs in text files, will result in Elpher using an external
programme to open the URL. This will be either the default system browser
or, if the @code{elpher-open-urls-with-eww} customization variable is non-nil,
Emacs' own EWW browser. (See @pxref{Customization}.)
Once a text, menu or query response page has been displayed, its contents are
cached for the duration of the Emacs session.
-@item @kbd{g} (@code{elpher-go})
-Open a particular page by specifying either its URL or directly entering
-a host, port and selector.
+@keycmd{@key{g}, elpher-go}
+Open a particular page by specifying either its full URL or just
+entering a gopher host name. (The protocol defaults to gopher, so gemini
+links must include the @code{gemini://} prefix.
+
+If a unsupported protocol is used in the URL the result will be the same
+as following a URL link of the same type from a link in a page.
-Note that if a non-gopher protocol is used in the URL the result will be
-the same as following a URL link of the same type from a gopher menu.
+@keycmd{@key{o}, elpher-go-current}
+Prompts for a URL similar to @code{elpher-go}, but initialized to the URL
+of the current page. This allows you to easily try other selectors for the
+same server.
-@item @kbd{O} (@code{elpher-root-dir})
+Remember however, that the Gopher RFC 1436 provides @emph{no} guarantees about the
+structure of selectors.
+
+@keycmd{@key{O}, elpher-root-dir}
Open the root page (empty selector) on the current host.
-@item @kbd{u} (@code{elpher-back})
+@keycmd{@key{u}\, @key{-}\, @key{^}\, @key{mouse-3}, elpher-back}
Return to the previous page, where ``previous'' means the page where the
page which was displayed immediately before the current page.
@end table
+
@node History and Caching, , Between-page navigation, Navigation
@section History and Caching
@end enumerate
The only way to return to pages in this history is by using @key{u},
-which returns to the previous of the current page.
-@footnote{The addition of the new page to the history happens even if
-the new page is one that has been seen before. This is mostly the
-desired behaviour. However, opening an explicit ``back'' link provided
-by a gopher menu will also add a new entry to the history. Unless you
+which returns to the previous of the current page. @footnote{The
+addition of the new page to the history happens even if the new page is
+one that has been seen before. This is mostly the desired behaviour.
+However, opening an explicit ``back'' link provided by a gopher menu or
+gemini page will also add a new entry to the history. Unless you
haven't yet visited that menu, it's therefore better to use @key{u} to
go back in this case.}
from a given page. This means that, at least for links followed from menus
and text files, the inverse of @key{u} is actually just @key{RET}.
-@node Bookmarks, Character encodings, Navigation, Top
+Elpher actually maintains two histories, and there are two different
+commands to access them:
+
+@table @asis
+@keycmd{@key{s}, elpher-show-history}
+This shows the history of the current buffer. This shows all the links
+you would visit if you were to use @key{u} again and again.
+
+@keycmd{@key{S}, elpher-show-visited-pages}
+This shows the entire Elpher browsing history. It includes all the
+pages you visited in your current Emacs session.
+
+@end table
+
+@node Bookmarks, Gopher character encodings, Navigation, Top
@chapter Bookmarks
-Elpher has a very simple link bookmarking system involving the
-following commands:
+Elpher makes use of standard Emacs bookmarks.
+@xref{Bookmarks, , , emacs, The Emacs Editor}.
+The following commands are used to add new bookmarks:
@table @asis
-@item @key{a} (@code{elpher-bookmark-link})
+@keycmd{@key{a}, elpher-bookmark-link}
Add a bookmark for the link at point. The minibuffer will prompt for
a name for the bookmark, which defaults to the display string.
-@item @key{A} (@code{elpher-bookmark-current})
+@keycmd{@key{A}, elpher-bookmark-current}
Add a bookmark for the current page. The minibuffer will prompt for
a name for the bookmark, defaulting to the display string associated
with the link that was followed to reach the current page.
-@item @key{x} (@code{elpher-unbookmark-link})
-Immediately remove the bookmark (if one exists) to the link at point.
-@item @key{X} (@code{elpher-unbookmark-current})
-Immediately remove the bookmark (if one exists) to the current page.
+@keycmd{@key{B}, elpher-open-bookmarks}
+Visit a page displaying all elpher bookmarks.
+The behaviour of the this function depends on the customization variable
+@code{elpher-use-emacs-bookmark-menu}. If nil (the default), the
+command will visit a special elpher page listing all elpher-specific
+bookmarks. If non-nil, the command will simply open the standard Emacs
+bookmark list displaying all current bookmarks (including non-elpher
+bookmarks).
+
+@keycmd{@kbd{C-x r l}, bookmark-bmenu-list}
+This command opens the standard Emacs bookmark menu, with which bookmarks
+can be renamed, deleted or annotated.
-@item @key{B} (@code{elpher-bookmarks})
-Open a page displaying all current bookmarks. Note that this bookmark
-page is added to the history just as if you had opened it using a link.
-Thus to return to the previous page, use @kbd{u}. This also means
-that you can peruse the various bookmarks by visiting them in turn,
-using @kbd{u} to return to the bookmark page (where the position of point
-is cached), then moving to another bookmarked link and so on.
@end table
-Bookmarks are stored as a s-exp in the file @file{elpher-bookmarks}
-in the user emacs directory (usually @file{~/.emacs.d/}).
-Any command which modifies the list of bookmarks immediately updates
-this file.
+On opening the bookmarks page, elpher will offer to import any legacy
+(2.x) bookmarks files into the new system. Once the import is complete,
+the original bookmarks file will have ``-legacy'' appended to it, so
+so that elpher knows not to import it again.
+
+If you have any other legacy bookmark files (besides the one in the
+original location, or specified in the @code{elpher-bookmarks-file}
+customization variable, which should be automatically detected), you can
+can import these using
+
+@example
+@kbd{M-x elpher-bookmark-import @key{RET}}
+@end example
-@node Character encodings, Encrypted connections, Bookmarks, Top
-@chapter Character encodings
+Once this is done, you may delete these legacy bookmarks files.
+
+@node Gopher character encodings, Encrypted gopher connections, Bookmarks, Top
+@chapter Gopher character encodings
+
+Responses Elpher retrieves from servers are initially read as pure
+binary data. When the data is intended to be interpreted as textual (as
+determined by the type parameter of the gopher menu item or the gopher
+URL), this data needs to be @emph{decoded} into a sequence of
+characters. To do this properly requires knowledge of the encoding
+system used by whoever authored the document.
+
+Unfortunately gopher lacks a systematic way of acquiring this necessary
+information. Thus, the details of the coding system must be either
+inferred from the binary data, or must be specified by the user.
+
+By default, Elpher applies Emacs' built-in character encoding detection
+system to the full (undecoded) response data and uses this to attempt to
+convert it into a character string.
+(See @pxref{Recognize coding, Recognizing coding systems, ,emacs}.) While
+this approach can be okay, it is important to realize that its inference
+algorithm is extremely primitive and depends heavily on assumptions based
+on the language settings of your emacs system.
+
+The alternative is to explicitly set the coding system used for decoding
+using the following command:
+
+@table @asis
+@keycmd{@key{!},elpher-set-coding-system}
+Causes a elpher to prompt for a coding system to use for decoding
+future gopher text. The @key{TAB} key can be used at this prompt to display a
+list of alternatives (which is extensive) and to auto-complete. An empty
+response will cause Elpher to return to its default auto-detection
+behaviour.
+@end table
+
+Note that changing the coding system only affects newly loaded text.
+Thus, if text has already been decoded using an incorrect system, you
+will need to select the correct coding and then reload the text using
+@key{R}.
+
+
+@node Encrypted gopher connections, Gemini support, Gopher character encodings, Top
+@chapter Encrypted gopher connections
+
+While RFC 1436 does not broach the topic of encryption at all, several
+modern gopher servers can serve content over encrypted connections,
+and a common choice for this is TLS.
+
+Elpher can retrieve selectors using Emacs' built-in TLS support which
+uses the GnuTLS library. (It is possible to build emacs without
+GnuTLS, in which case encryption is not supported.)
+
+To retrieve documents using TLS, Elpher's TLS mode must be enabled.
+This can be directly toggled using @key{T}, but note that just as with
+the character encoding, changing this mode only affects subsequent
+connections.
+
+Alternatively, TLS mode is @emph{automatically} enabled whenever
+gopher URLs starting with @code{gophers://} are followed.
+
+The mode is sticky, so it remains active until switched off.
+It can also be automatically switched off when a TLS connection fails.
+In this case Elpher will prompt for your confirmation to ensure that
+you can't accidentally make a non-TLS connection.
+
+@node Gemini support, Finger support, Encrypted gopher connections, Top
+@chapter Gemini support
+
+@uref{gopher://gemini.circumlunar.space, Gemini}
+is a new protocol being developed by several members of
+gopherspace. It aims to solve some of the long-standing technical
+issues associated with gopher as a protocol, while keeping the major benefits.
+For instance, it _requires_ encrypted connections, it does away with
+the selector type, and allows servers to explicitly specify the
+character coding scheme used for text documents.
+
+The latest versions of Elpher aim to provide seamless transitions between
+gemini and gopher documents. Basically you should be able to open,
+bookmark, download and otherwise interact with gemini pages in exactly
+the same way as you do with other non-gemini pages. The only major
+difference from your perspective as a user is that you should no longer
+have to worry about manually toggling TLS on or off (for gemini it's
+always on), and you should never have to manually set a character coding
+scheme.
+
+The gemini protocol specification recommends a Trust on First Use (TOFU)
+behaviour when validating gemini server TLS certificates. This is
+because many gemini servers rely on self-signed certificates rather
+than certificates signed by a CA. Sadly however, this TOFU behaviour is
+far from straight-forward to configure using Emacs' existing Network
+Security Manager. For this reason, elpher defaults to performing no
+certificate verification by default. This behaviour can be easily
+customized by setting the @code{elpher-gemini-TLS-cert-checks}
+customization variable to non-nil.
+
+The gemini specification concerns both the protocol and a simple text
+document format (mimetype text/gemini) which is like a mixture between
+gophermap files and markdown-formatted files but simpler than both.
+Elpher renders gemini responses which are provided in this format in
+line with the rules in the spec. This includes wrapping long lines at
+word boundaries. The specific column at which this text is wrapped is
+defined by the customization variable
+@code{elpher-gemini-max-fill-width}, which is set to 80 columns by
+default. (This is slightly wider than Emacs' default fill width of 70
+columns due to the fact that there are a significant amount of older
+gemini content which, against the advice of the current spec, hard wraps
+at <80 columns. The larger default allows this to still look okay,
+while still keeping content without hard wraps looking pleasant.)
+
+The text/gemini format also possesses a section header syntax similar to
+markdown. Elpher allows different header levels to be drawn with
+different, customizable, faces. By default, on graphically-capable
+emacs systems, these faces are given different heights to distinguish
+among levels. On terminal systems, the level is indicated by the
+number of preceding # symbols.
+
+I should emphasize however that, while it is definitely functional,
+Elpher's gemini support is still experimental, and various aspects will
+change as the protocol develops further.
+
+@section Client Certificates for Gemini
+
+Gemini makes explicit use of the client certificate mechanism that TLS
+provides for allowing clients to authenticate themselves with servers.
+The Gemini specification suggests two distinct classes of client
+certificates: short-lived certificates used to identify you for a single
+session, and more permanent certificates used to identify you over a
+longer time period.
+
+When Elpher receives a request for a client certificate from a server,
+it will present you with the option to create and use a single-use
+``throwaway'' certificate, or to use a ``persistent''
+certificate (optionally creating it or installing pre-existing key and
+certificate files).
+
+Certificate creation in Elpher requires an installation of OpenSSL, and
+---in particular---that Elpher be able to run the @command{openssl} command-line
+utility. By default, Elpher assumes that the @command{openssl} is on the
+system path, but the precise location can be set by customizing the
+@code{elpher-openssl-command} variable.
+
+Each generated certificate results in the creation of a .key file and
+a .crt file. In the case of a throwaway certificate, these files are
+stored in the temporary directory indicated by the Emacs variable
+@code{temporary-file-directory} and are deleted when ``forgotten''
+(as described below).
+
+In the case of persistent certificates, these files are stored in the
+folder defined by the Elpher variable
+@code{elpher-certificate-directory}, and are never deleted by Elpher.
+(Of course you can delete them yourself whenever you like.)
+The base name of the files (i.e. sans extension) is what Elpher uses
+to identify the certificate.
+
+Using throwaway certificates is as simple as pressing the @key{t}
+key at the prompt which appears following a certificate request from
+a server. There is nothing more to do.
+
+Using a persistent certificate requires instead selecting @key{p} from the same
+menu. This will result in Elpher asking you for the name identifying
+the certificate. This entry autocompletes to the list of known certificate
+names, so you can use @key{TAB} to display the list.
+
+In the case that you choose a name that does not belong to the list of
+known certificates, Elpher will offer to create one for you or to
+``install'' one from existing key and certificate files.
+Pressing the @key{n} key will cause Elpher to begin the process of
+creating a new persistent certificate, using some additional
+details for which you will be prompted.
+Alternatively, pressing the @key{i} key will cause Elpher to ask for the
+locations of edisting key and certificate files to add to
+@code{elpher-certificate-directory} under the chosen name.
+
+Once a certificate is selected, it will be used for all subsequent TLS
+transactions to the host for which the certificate was created.
+It is immediately ``forgotten'' when a TLS connection to another host
+is attempted, or the following command is issued:
+
+@table @asis
+@keycmd{@key{F},elpher-forget-certificate}
+Causes Elpher to immediately forget any currently-loaded client certificate.
+@end table
-@node Encrypted connections, Customization, Character encodings, Top
-@chapter Encrypted connections
+In either case, ``forgetting'' means that the details of the key and
+certificate file pair are erased from memory. Furthermore, in the case
+of throw-away certificates, the corresponding files are deleted.
-@node Customization, Index, Encrypted connections, Top
+
+@node Finger support, Customization, Gemini support, Top
+@chapter Finger support
+
+Incidentally, Elpher has native support for querying finger servers.
+Of course, one could argue that this functionality is more easily
+provided by one's local telnet client. However finger URLs do appear
+on occasion in gopherspace, and it's nice to be able to open them
+in place.
+
+Elpher interprets @code{finger://} URLs as follows:
+
+@itemize
+
+@item
+The host is determined by the host name portion of the URL.
+
+@item
+In the case that the @emph{file name} portion of the URL is non-empty (besides
+the leading slash), this is interpreted as the user to finger.
+
+@item
+Otherwise, the @emph{user} portion of the URL is interpreted as the user to finger.
+
+@item
+If no user is provided, the root directory of the finger server is requested.
+
+@end itemize
+
+Thus @code{finger://user@@hostname} and @code{finger://hostname/user} are both equivalent.
+
+(The precedence of the /user notation over the user@ notation reflects a
+preference of the community.)
+
+@node Customization, Command Index, Finger support, Top
@chapter Customization
-@node Index, , Customization, Top
-@unnumbered Index
+Various parts of Elpher can be customized via the
+variables belonging to the elpher customization group, accessible
+using
+
+@example
+@kbd{M-x customize-group elpher @key{RET}}
+@end example
+
+@noindent This group contains a number of faces that can be modified to change
+the appearance of Elpher, including one face per menu item type.
+
+The group also contains variables for customizing the behaviour of
+Elpher. This includes how to open arbitrary (non-gopher) URLs, whether
+to display buffer headers, how to deal with ANSI escape sequences in
+text, the timeout to impose on network connections, and whether to
+prompt for confirmation when switching away from TLS.
+
+See the customization group itself for details.
+
+@node Command Index, News, Customization, Top
+@unnumbered Command Index
+
+@printindex fn
+
+@node News, Acknowledgements, Command Index, Top
+@chapter News
+
+This chapter documents the major changes introduced by Elpher releases.
+
+@section v3.1.0
+
+@subsection Bookmarks system
+
+While Elpher bookmarks are still handled by the Emacs bookmark
+system, this release introduces the option to retain the
+original elpher bookmark page for the purpose of visiting those
+bookmarks. In v3.1.0, @key{B} visits this page (and adds it to
+the history stack, as in previous versions), which can be interacted
+with using the standard elpher key bindings.
+
+Of course you can still view the bookmarks in the Emacs bookmark
+menu, which you can access from anywhere using the default
+binding @kbd{C-x r l} (or by following the link from the Elpher bookmarks
+page). Indeed you will need to use this to rename, delete or otherwise
+edit your bookmarks.
+
+If you prefer to avoid using the Elpher bookmark page entirely, you
+use the customization variable @code{elpher-use-emacs-bookmark-menu}
+to have the @key{B} key open the Emacs bookmark menu directly, as in
+the previous release.
+
+@section v3.0.0
+
+@subsection Bookmarks system
+
+Bookmarks are now handled by Emacs' own bookmark management system,
+instead of Elpher's own system.
+(For details, @xref{Bookmarks, , , emacs, The Emacs Editor}.)
+This means two things. Firstly,
+the bookmarks file (elpher-bookmarks by default) and format used by
+previous versions are now deprecated. If these are detected, Elpher
+will offer to import your old bookmarks when you first accessing the
+bookmark list with the new version. A suffix will be added to your
+old bookmarks file so that Elpher knows that the import is complete.
+
+Secondly, the old Elpher bookmark menu has been removed in the new
+version. Instead, @key{B} brings up the menu provided by the Emacs
+function @code{bookmark-bmenu-list}. This has different key and mouse
+bindings to Elpher's old menu, but is much more functional. Bookmarks
+can be renamed, deleted in groups, and much more. (Use @kbd{C-h m} with
+the menu open to see the complete list.)
+
+@subsection History
+
+Browsing history can now be accessed via new bindings to @key{s} and @key{S}.
+The former shows the current history ``stack'' (pages accessible with
+the @key{u} key), while the latter shows a list of all pages which have
+been visited in the current session.
+
+@subsection Socks connections
+
+Elpher can now use socks connections to browse via TOR.
+
+@subsection browse-url, Org and mu4e integration
+
+These integrations provide support for elpher-handling of gemini, gopher
+and finger URLs using @code{browse-url}, in Org documents, and the mu4e
+mail system.
+
+@subsection imenu integration
+
+Gemini document headers are now navigable via imenu.
+For details, @xref{Imenu, , , emacs, The Emacs Editor}.
+
+@node Acknowledgements, , News, Top
+@chapter Acknowledgements
+
+Elpher was originally written by Tim Vaughan. Recent maintenance has
+been done by and with the help of Alex Schroeder. In addition, the
+following people (in alphabetical order) have generously provided
+assistance and/or patches:
+
+@itemize
+@item Alexis
+@item Christopher Brannon
+@item Zhiwei Chen
+@item condy0919
+@item Étienne Deparis
+@item Roy Koushik
+@item Simon Nicolussi
+@item Noodles!
+@item Jens Östlund
+@item Abhiseck Paira
+@item F. Jason Park
+@item Omar Polo
+@item Koushk Roy
+@item Michel Alexandre Salim
+@item Alex Schroeder
+@item Daniel Semyonov
+@item Simon South
+@item Bradley Thornton
+@item Vee
+@end itemize
-@printindex cp
@bye
The Lambda Lab / projects / elpher.git / blobdiff