From: plugd <plugd@thelambdalab.xyz>
Date: Wed, 2 Feb 2022 13:02:10 +0000 (+0100)
Subject: Updated installation instructions in README.
X-Git-Tag: v3.3.1
X-Git-Url: https://thelambdalab.xyz/gitweb/index.cgi?p=elpher.git;a=commitdiff_plain;h=22649fd442d505af3367a6386fa7f0da9a82c9e8

Updated installation instructions in README.
---

diff --git a/README b/README
index d684b91..6be2207 100644
--- a/README
+++ b/README
@@ -26,11 +26,17 @@ Any suggestions for improvements are welcome!
 Installation
 ------------
 
-Elpher is available from  MELPA (https://melpa.org).  If you have
-never installed packages from this repository before, you'll need
-to follow the instructions at https://melpa.org/#/getting-started.
+Elpher is available on the non-GNU ELPA package archive.  If you are
+using Emacs 28 or later, this archive should be available on your system
+by default.  For Emacs 27, you'll need to follow the instructions at
+https://elpa.nongnu.org to make the archive accessible.
 
-To install Elpher, enter the following:
+Alternatively, Elpher is available from MELPA (https://melpa.org).  If
+you have never installed packages from this repository before, you'll
+need to follow the instructions at https://melpa.org/#/getting-started.
+
+Once one of these package archives is installed, enter the following to
+install Elpher:
 
     M-x package-install RET elpher RET